Jiangyin Yuanshi Heavy Industry
machinery Co.,Ltd.
Jiangyin Yuanshi Heavy Industry machinery Co.,Ltd.

13961664715

Home > News > Company News
News

Metal hydraulic shearing machine operation

Release time: 2020-05-27

Source: http://www.jiangsu-pack.com/

Views: 369

Metal hydraulic shearing machine operation

Yuanshi Heavy Industry launched Tiger head shears and Crocodile shears, which are driven by hydraulic pressure, with reliable safety performance and simple operation. With fast equipment, the cutting speed can be doubled.

Metal hydraulic shearing machine

1. It is necessary for the user to pay attention to the fact that the hydraulic gantry shearing machine must be handled by a special person.
2. Dress standard, wear tight protective clothing before operation, fasten the cuffs, the hem of the jacket should not be opened, and it is not allowed to wear, take off or change clothes, or wrap it around the machine to avoid the machine from being injured. It is necessary to wear a hard hat, and no skirts or slippers are allowed.
3. It is necessary for the operator to be familiar with the primary structure, performance and application method of the shear.
4. It is suitable for all kinds of steel plates, copper plates, aluminum plates and non-metallic data plates whose shear data thickness is the rated value of the machine tool, and it is necessary to have no hard marks, welding slag, slag inclusions, welding seams, and excessive thickness is not allowed.
5. The operator should operate according to the usage method in the manual:
a. Adjust the gap of the blade according to the thickness of the material being cut.
b. Adjust the master or fixture according to the width of the material being cut.
c. Before the operation of the machine tool, do 1-3 idle rotations, and then perform the cutting operation after normal operation.
6. If it is found that the shearing machine is not operating normally during operation, the power supply should be stopped immediately to stop and check.
7. When adjusting the machine tool, it is necessary to block the power supply, and pay attention to the safety of the hand when moving the workpiece.
8. All parts should always be kept smooth. The operator should add smooth oil every shift, and the mechanics should fill the rolling bearing parts once every six months.
9. It is necessary to appoint a special person to command multi-person collaborative operations. Stop cutting two pieces of material together on the same cutting machine.
10. On-site cleaning operations, the workplace to stop piles of workpieces and debris, to achieve time to keep machine tools and places clean.


Crocodile shears, also known as alligator shear, also belong to Metal hydraulic shearing machine, which is applicable to metal recycling and processing plants, scrap car dismantling yards, and smelting and casting industries. , Iron plate, copper plate, aluminum plate, steel wire rope, rebar, angle cut iron, and other metal structures are cold-cut and processed into qualified furnace materials.

Proper handling of Metal hydraulic shearing machine will prolong the service life of the shear. I hope it will be helpful to use this equipment in the future.

Tag: Metal hydraulic shearing machine, Tiger head shears, Crocodile shears

Company News

Tel:13961664715/13921210194

Fax:0510-86156804

Add:Jiangyin Yunting Industrial Park, Jiangsu Province

Contact Us
News
我是分类列表

检测到您的IP地址为韩国,是否跳转至韩文站?